Innovation in Surfboards Since 1985

Half n Half Snaggle Tooth 2.0

Dimensions Guide
Snaggle Tooth Dims
Length Width Thickness Volume
4'0" 18.75" 1.70" 16.5 L
4'2" 19.0" 1.71" 17.5 L
4'4" 19.25" 1.72" 18.5 L
4'6" 19.5" 1.73" 19.5 L
4'8" 19.75" 1.74" 20.7 L
4'10" 20.0" 1.75" 21.9 L
5'0" 20.25" 1.76" 23.1 L
Dimensions Guide
Snaggle Tooth Dims
Length Width Thickness Volume
4'0" 18.75" 1.70" 16.5 L
4'2" 19.0" 1.71" 17.5 L
4'4" 19.25" 1.72" 18.5 L
4'6" 19.5" 1.73" 19.5 L
4'8" 19.75" 1.74" 20.7 L
4'10" 20.0" 1.75" 21.9 L
5'0" 20.25" 1.76" 23.1 L

***Available for Pre-Order

Rusty was redesigning the Snaggletooth when we signed Champion wake surfer, Chad Carlson, to the team. With some input from Chad, we made some refinements. With those refinements and design updates combined we introduce the Snaggletooth 2.0. The Snaggletooth 2.0 has a square tail vs a thumb tail. This gives it more area, which provides for extra lift. This also allows for sharper more angular turns.

The 2.0 has a modest single concave in the central part of the board which splits into a double concave in the “zone’ between the feet. The deepest part of the concave is out toward the rail coinciding with the rear of the fins. This focuses the water through the fins and out the back which gives the board extra bite and squirt. The foil is balanced and the rail is more contoured in the front for easier entry. It becomes slightly fuller and lower as it goes to the rear. The original was offered as a 5 fin, while the 2.0 is offered as a twin fin only.

This board is constructed in our new Half n Half technology.

Half n Half technology combines our new R.1 foam core and R.ealRail technology with traditional epoxy lamination to bring you a high quality, hand made, hybrid wakesurf. Not quite a soft top, and not quite a hardboard, Half n Half technology gives you the safety of a soft top while still benefiting from the bottom contours, hand-shaped rails, and fin boxes of a traditional high performance, hand-shaped board.

Half n Half wakesurfs feature our new R.ealGrip deck technology, so you can ditch the wax, and our R.ealRail safety rails are easier on you, and the boat.

All Half n Half boards are hand shaped at our factory in San Diego, CA.

Read More

DIMENSIONS

BOARD SIZES AND SPECIFICATIONS

Length Width Thickness Volume
4'2" 19.0" 1.71" 17.5 L
4'4" 19.25"
1.72"
18.5 L
4'6" 19.5"
1.73"
19.5 L
4'8" 19.75"
1.74"
20.7 L
4'10" 20.0" 1.75"
21.9 L
5'0" 20.25"
1.76"
21.9 L
5'2" 20.5"
1.77"
22.0 L

Check Calculator for Volume Recommendation

VOLUME CALCULATOR >

*NOTE: PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

**SHIPPING COST FOR BOARDS IS BASED ON SIZE.

Search